Hey there, this is Mia from the dashcam team. For the last seven years, I’ve spent my days talking to drivers just like you—folks who’ve saved thousands in insurance claims because they caught a fender bender on their dashcam, or who’ve breathed easy knowing their car’s parked safely on their security feed. But one question that pops up every single week? “How do I actually update my dashcam firmware?” Dashcam

I get it. If you’re anything like the first time I tried to update my old home router, you probably stare at a list of tech terms in the dashcam manual, check a video online that’s either too vague or way too complicated, and just… put it off. Until one day, a friend tells you their dashcam’s night vision stopped working, or they got a weird glitch where it won’t start up after a power outage, and you kick yourself for not doing the update when you had the chance.
Here’s the thing: firmware updates aren’t just some random “check box” for tech people. For dashcams, they’re the reason your camera works the way it’s supposed to—better night vision, fixed glitches that make recordings cut out, new features like motion detection for parked cars, even improved GPS accuracy so your accident reports have the right time and location. I’ve seen it first-hand: last month, a customer reached out saying their dashcam’s G-force sensor (the one that locks your accident footage) was missing a minor bump, and after we pushed a quick firmware update, it worked perfectly again. Another told us their night vision was so dim on rainy nights they could barely read a license plate, and the update fixed that too.
So today, I’m going to walk you through exactly how to update your dashcam firmware—step by step, no jargon, no confusing links, just what you need to know, whether you’re a tech newbie or someone who’s swapped out three dashcams in the last two years. And since I’m on the supplier side, I’ll even throw in a few pro tips from our team that we don’t always share in the quick start guide.
First, let’s get one thing straight: you don’t need a fancy laptop or any weird tools to do this. The entire process uses a regular USB drive you probably already have lying around your house—like the one you used to back up your kid’s soccer photos, or the old one from your work presentation last quarter. It’s super simple, I promise.
But before we jump into the steps, there are a few things you need to do first. Skipping these checks is how people end up with a messed-up dashcam that won’t turn on. Trust me, we’ve gotten a few support tickets from that, and it’s an easy fix if you just take two minutes to prep.
-
Know exactly what dashcam model you have. This might seem obvious, but you’d be surprised how many people search for “dashcam firmware update” and don’t specify their camera’s model number. If you bought one from us, the model number is printed on the back of the dashcam itself, and also on the original box. If you lost the box, you can find it in your dashcam’s settings menu—most models have a “Device Info” or “About” tab that lists the model and serial number. Using the wrong firmware for your camera is the number one cause of failed updates, so double-check this.
-
Grab a blank, empty USB drive (or one with stuff you don’t mind erasing). I can’t stress this enough: the USB needs to be at least 2GB (most dashcams only need 1GB max for firmware files) and totally empty. If there are old recordings, photos, or other files on it, the dashcam might not recognize the firmware file, or it could cause a corruption error. If the USB has files you need, just move them to your computer first before using it for the update. And yes, we recommend a USB drive—we’ve tested it with everything from the tiny 1GB USB sticks to the bigger 32GB ones, and the smaller ones work just fine. No need to buy a new one unless you don’t have any spare.
-
Make sure your dashcam is charged (or plugged into your car). Wait, if you’re updating your dashcam, you’re probably going to do it in your car, right? That’s the easiest way. Just plug the dashcam into your car’s power outlet, or if you have a hardwired kit, leave the car running for a few minutes while you do the update (don’t leave it running for hours, just enough to keep the camera powered). If you try to update it when the battery is dying, the process will get interrupted and that’s how you get a bricked dashcam. Again, rare, but avoidable.
Okay, pre-checks done. Now let’s get to the actual steps. This is the part that’s been confusing for so many people, so I’ll break it down super simply, with notes from our team’s experience to make it even easier.
Step 1: Download the right firmware file for your model. As your dashcam supplier, we make every firmware update available on our support page for free—no hidden fees, no subscriptions, just a direct download. Once you’re on the support page, search for your model number, and you’ll see a tab that says “Firmware Updates.” Each entry has a version number, a release date, and a note about what’s new (like “fixed night vision glitch” or “improved GPS accuracy”). Always download the most recent version—unless the notes say something like “this version is for older camera units” (we almost never do that, but it’s good to double-check).
When you click download, it’ll save as a ZIP file, right? Don’t unzip it. I know, I know—most tech stuff tells you to unzip files, but for dashcams, you need to leave it as a ZIP. Unzipping it turns it into a bunch of small files, and the dashcam won’t recognize it. We get so many calls from people who unzipped the firmware and then it didn’t work. So just save the ZIP file to your desktop for now.
Step 2: Copy the firmware ZIP file to your USB drive. Plug your empty USB drive into your computer. Open the folder where you saved the firmware ZIP file, drag and drop it directly into the main folder of your USB drive—don’t put it in any subfolders, like a “Documents” or “Photos” folder on the USB. The dashcam only looks in the root (main) folder of the USB for the firmware file. If you put it in a subfolder, it won’t find it. That’s another common mistake.
Once the file is copied, safely eject the USB from your computer. Do not just yank it out—on Windows, click the “Safely Remove Hardware” icon in the taskbar, and on Mac, drag the USB icon to the trash. If you skip this step, you could corrupt the file, and the update will fail.
Step 3: Install the firmware on your dashcam. Now it’s time to plug the USB into your dashcam. Most dashcams have a small USB port on the side or back—either plug it directly into the port, or use the short USB cable that came with your camera (just make sure the other end is empty, since it’s not going to your car right now). Don’t plug it into your car’s port for this step—just the dashcam itself.
Once the USB is plugged in, turn your dashcam on. Here’s where it might be different depending on your model, but almost all dashcams will automatically detect the firmware file on the USB and start the update process. You’ll see a little message on the dashcam screen, like “Updating Firmware… Do Not Turn Off” or a spinning gear icon.
Now, wait. Don’t touch anything. Don’t turn the dashcam off, don’t unplug the USB, don’t press any buttons. The update usually takes between 1 and 3 minutes—some faster, some a little longer. If you see the dashcam turn off on its own, that’s normal—firmware updates often reboot the camera to apply the new software. Wait a full minute after the screen goes black, then unplug the USB.
Step 4: Verify the update worked. This is the final step, and it’s important to make sure it actually went through. Turn your dashcam back on, go to the “Device Info” or “About” settings tab, and check the firmware version. It should match the version you downloaded. If it does, you’re all set! If not, don’t panic—just repeat the steps, double-checking that you used the right model’s firmware, the USB was empty, and you copied the ZIP file to the root folder.
Now, let’s talk about some common problems people run into, because even with the simple steps, things can go wrong sometimes. I’ve heard every one of these issues, so I’ll give you the fixes that work every time.
-
Problem: The dashcam doesn’t detect the USB at all.
Fix: First, make sure the USB drive is working. Plug it back into your computer and see if you can open it. If your computer doesn’t recognize it, that means the USB is faulty—try a different one. Also, check that the firmware ZIP file is actually on the USB, not buried in a subfolder. If you downloaded the ZIP twice, delete the old one and copy the new one over, just to be sure. -
Problem: The update gets stuck halfway.
Fix: This almost always happens if the dashcam lost power, or the USB got unplugged. If that’s the case, don’t try to turn the dashcam on and off repeatedly—wait 5 minutes, then plug the USB back in and turn the dashcam on again. If it still doesn’t work, try using a different USB drive and re-downloading the firmware file. We’ve found that sometimes a corrupted download is the culprit here, so a fresh copy fixes it. -
Problem: After the update, features I liked before are gone.
Fix: That’s super rare, but it can happen if you accidentally downloaded a firmware for a different model. Double-check the firmware version in the “Device Info” tab—if it’s not the new one you wanted, just repeat the process with the correct firmware for your model. All our firmware notes are super clear about what each version does, so you can always go back to an older version if you need to.
Now, a few pro tips from our dashcam team that you won’t find in the manual, because we only share these with our direct customers:
- Update your firmware at least once every six months. We release small updates every few months to fix bugs and add features, and doing this regularly means you never have to fix a big problem later. For example, last year, we released an update that fixed a glitch where some dashcams would stop recording when it rained—customers who updated every six months never had that issue.
- Never update your firmware while driving. I know it’s tempting to plug in the USB and do it while you’re parked, but even if you’re just sitting there, it’s safer to do it with the car parked and the key in the “on” position (not running) to keep the dashcam powered.
- If you have a dashcam with built-in Wi-Fi (a lot of our newer models do), you can update the firmware wirelessly too. Just go to the settings menu, look for “Wireless Update,” and it’ll automatically check for new versions. That’s even simpler than using a USB—no need to mess with copying files. But the USB method works every time if you don’t have Wi-Fi, or if the wireless update isn’t working for some reason.
Wait, I know a lot of you might be thinking: “Why do I even need to do this? My dashcam works fine.” Let me give you a quick example of why updating matters. A customer of ours named Tom, who lives in a snowy area, told us last winter that his dashcam’s parking mode stopped working when it was below 20 degrees. He didn’t update it for a year, until he saw a social media post from our team about a firmware update that fixed cold-weather parking mode glitches. He did the update, and it worked perfectly. If he’d skipped it, he would have had a gap in his parking footage when someone scratched his car in a snowstorm. That’s the kind of thing firmware updates prevent—small, annoying, and costly problems that you don’t even know exist until they happen.
Now, I want to make sure this is clear: if you’re not comfortable doing this yourself, that’s totally okay. Our support team can walk you through every step over the phone or via chat—we never want you to feel stuck. And if you run into a problem that’s not fixed by the tips I shared, just reach out, and we’ll help you get it sorted out.
At the end of the day, our job as a dashcam supplier isn’t just to sell you a camera—it’s to make sure it works as well as it can for years. That means giving you clear, easy-to-follow instructions for updates, and being here when you need help. We’ve designed our firmware update process to be as simple as possible, because we know tech shouldn’t be a headache.
![]()
If you’re interested in learning more about our dashcam line, or have questions about firmware updates for your existing camera, we’d love to talk to you. We work with drivers of all kinds—from commuters to truckers, from parents with kids to people who just want peace of mind on the road. Whether you’re looking for a new dashcam or need help with an update, don’t hesitate to reach out to our team to discuss your needs.
References
IOT SIM Cards Dashcam Firmware Update Best Practices, Automotive Edge Computing Consortium.
Consumer Reports: Dashcam Maintenance Guide, 2023.
Our Internal Product Support Logs, 2017-2024.
AutoSali Digital Technology
As one of the most professional dashcam manufacturers and suppliers in China, we also support customized service. Please feel free to wholesale bulk advanced dashcam made in China here from our factory. For pricelist, contact us now.
Address: No 282 Da Shi Street Panyu District Guangzhou, China
E-mail: violachueng@auto-sali.com
WebSite: http://www.autosaligps.com/